First Results From Metallurgical Testwork - Amended
Released
Released
Announcement PDF
ASX RELEASE
25 October 2023
ASX: JRL
OTC: JNDAF
CLARIFYING ANNOUNCEMENT
FIRST RESULTS FROM METALLURGICAL
TESTWORK AT MCDERMITT LITHIUM PROJECT
Jindalee Resources Limited provides supplementary information to the the below announcement, being the
addition of Annexure A containing JORC Code, 2012 Edition Table 1 details including Section 1 Sampling
Techniques and Data, and Section 2 Reporting of Exploration Results.
•
Head assays received for McDermitt metallurgical samples being tested at
Hazen (US) and managed by Fluor
•
Head assays average 1790 ppm Li, 34% higher than average McDermitt
resource grade (Indicated and Inferred) of 1340 ppm Li¹
•
Benefication currently underway expected to further increase head grade
prior to acid leach testwork
Jindalee Resources Limited (Jindalee, the Company) is pleased to advise initial head assay results have been
received for metallurgical samples from Jindalee’s 100% owned McDermitt Lithium Project in Oregon, USA
(McDermitt, Project).
These samples average 0.179% Li (1790 ppm) (Table 1), 34% higher than the average grade of the current
McDermitt Indicated and Inferred resource grade of 0.134% Li (1340 ppm)1, suggesting excellent potential to
process shallow, higher grade ore early in the mine life, with positive implications for Project economics.
Sample
Unit 4
Unit 6
Unit 8
Unit 10
Average
Li
0.204
0.205
0.152
0.155
0.179
As
0.007
<0.005
<0.005
<0.005
<0.005
Ce
0.005
0.005
0.005
0.005
0.005
Head Assays (wt %)
La
Mn
Mo
0.002
0.064
<0.001
0.002
0.060
<0.001
0.002
0.061
<0.001
0.002
0.067
<0.001
0.002
0.063
<0.001
Sr
0.038
0.038
0.035
0.034
0.036
Y
0.003
0.003
0.003
0.003
0.003
Zn
0.019
0.018
0.020
0.017
0.018
Table 1. Head Assays from McDermitt metallurgical samples (rounded to 3 significant decimal places).
Discussion
In March 2023 Jindalee announced that global engineering, procurement, construction and maintenance
(EPCM) company Fluor Corporation (NYSE: FLR) (Fluor) had reviewed metallurgical testwork undertaken at
McDermitt and had determined that acid leaching with ore beneficiation (to upgrade the leach head grade)
delivered the lowest operating costs and best financial outcome among the alternatives considered2.
Fluor also noted that the very large Mineral Resource at McDermitt (21.5 Mt LCE, Table 2)1 allows flexibility
in development, providing the opportunity to optimise mining and feed higher grade ore early in the mine
life and recommended that a comprehensive metallurgical testwork program be undertaken to provide
information upon which the preferred flowsheet for the processing of McDermitt ore can be defined.
Figure 1 - Plan view of the McDermitt Lithium Project with 2023 Mineral Resource1 (at 1523mRL), completed drilling,
Section C-C’ & schematic conceptual pit shells (Pit Shell 5: 0-20 Yr).
Jindalee’s geological team has recently relogged all holes drilled at McDermitt and this work has resulted in
the recognition of up to 12 distinctive stratigraphic units which can be tracked across the Project (Figure 2).
Four of these units (Units 4, 6, 8 and 10) carry elevated lithium grades and selective mining of these units has
the potential to deliver higher grade material for processing.
In June 2023 leading mine engineering group Cube Consulting generated conceptual pit shells using the
McDermitt MRE geological model (Figures 1 & 2) to assist with selection of samples for the metallurgical
testwork program, which is being managed by Fluor3. Samples from Units 4, 6, 8 and 10 within the Indicated
portion of Pit Shell 5 (nominal 20 years) were selected and approximately 700kg of drill core was despatched
to consultant metallurgists Hazen for testing, with initial results from this work now being reported.
Figure 2 – Schematic Section C-C’ with completed drilling, simplified geology & conceptual pit shells (Pit Shell 5: 0-20 Yr)
(Note: lateral projection onto section plane & 3x vertical exaggeration may cause distortion).
Next Steps
Results from Particle Size Distribution testwork on the samples are being reviewed and attrition scrubbing to
beneficiate the ore and separate the lithium rich finer grained fractions prior to acid leaching is currently
underway, with results to be reported once available.
Authorised for release by the Board of Jindalee Resources Limited.
For further information please contact:
LINDSAY DUDFIELD
Executive Director and CEO
T: + 61 8 9321 7550
E: enquiry@jindalee.net
Indicated Resource
Inferred Resource
Indicated and Inferred Resource
Cut-off
Grade
(ppm Li)
Tonnage
(Mt)
Li Grade
(ppm)
LCE
(Mt)
Tonnage
(Mt)
Li Grade
(ppm)
LCE
(Mt)
Tonnage
(Mt)
Li Grade
(ppm)
LCE
(Mt)
1000
1,470
1,420
11.1
1,540
1,270
10.4
3,000
1340
21.5
Table 2. 2023 McDermitt Mineral Resource Estimates at reporting cut-off of 1,000ppm. Totals may vary due to rounding.
References:
Additional details including JORC 2012 reporting tables, where applicable, can be found in the following releases lodged
with ASX and available on the Company’s website (www.jindalee.net), and referred to in this announcement:
1.
2.
3.
Jindalee Resources ASX announcement 27/02/2023: “Resource at McDermitt increases to 21.5 Mt LCE”
Jindalee Resources ASX announcement 24/03/2023: “Preferred Lithium Extraction Process for McDermitt Project”
Jindalee Resources ASX announcement 31/07/2023: “Quarterly Activities Report – June 2023”
The Company confirms that it is not aware of any new information or data that materially affects the information
included in the market announcements referred to above and that all material assumptions and technical parameters
underpinning the estimates of mineral resources referenced in the market announcement continue to apply and have
not materially changed.
About Jindalee
Jindalee Resources Limited (ASX: JRL) is a pure-play US lithium company focussed on the development of the giant
McDermitt Lithium Project (21.5 Mt LCE1), currently the largest lithium deposit in North America. Jindalee also provides
shareholders with indirect exposure to lithium, gold, base and strategic metals, iron ore, uranium and magnesite in
Australia through holdings in spin-out companies Dynamic Metals (ASX: DYM) and Energy Metals (ASX: EME).
Competent Persons Statement
The information in this report that relates to Exploration Results, Mineral Resources or Ore Reserves is based on
information compiled by Mr Lindsay Dudfield. Mr Dudfield is a director and shareholder of, and consultant to, the
Company and a Member of the Australasian Institute of Mining and Metallurgy and the Australian Institute of
Geoscientists. Mr Dudfield has sufficient experience relevant to the styles of mineralisation and types of deposits under
consideration, and to the activity being undertaken, to qualify as a Competent Person as defined in the 2012 Edition of
the ‘Australasian Code for Reporting of Exploration Results, Minerals Resources and Ore Reserves.’ Mr Dudfield consents
to the inclusion in this report of the matters based on this information in the form and context in which it appears.
The Company confirms that it is not aware of any further new information or data that materially affects the information
included in the original market announcements by Jindalee Resources Ltd referenced in this report and in the case of
estimates of Mineral Resources, that all material assumptions and technical parameters underpinning the estimates in
the relevant market announcements continue to apply and have not materially changed. To the extent disclosed above,
the Company confirms that the form and context in which the Competent Person’s findings are presented have not
been materially modified from the original market announcements.
Forward-Looking Statements
This document may contain certain forward-looking statements. Forward-looking statements include but are not
limited to statements concerning Jindalee Resources Limited’s (Jindalee’s) current expectations, estimates and
projections about the industry in which Jindalee operates, and beliefs and assumptions regarding Jindalee’s future
performance. When used in this document, the words such as “anticipate”, “could”, “plan”, “estimate”, “expects”,
“seeks”, “intends”, “may”, “potential”, “should”, and similar expressions are forward-looking statements. Although
Jindalee believes that its expectations reflected in these forward-looking statements are reasonable, such statements
are subject to known and unknown risks, uncertainties and other factors, some of which are beyond the control of
Jindalee and no assurance can be given that actual results will be consistent with these forward-looking statements.
Such factors may include, among others, risks related to regulatory approvals of or in connection with the proposed
transaction, actual results of current or planned exploration activities, change in market conditions which affect the
completion of the transaction, obtaining appropriate approvals to undertake exploration activities in the portfolio of
projects, changes in exploration programs and budgets based upon the results of exploration, future prices of minerals
resources; grade or recovery rates; accidents, labour disputes and other risks of the mining industry; delays in obtaining
government approvals or financing or in the completion of development or construction activities; movements in the
share price of investments and the timing and proceeds realised on future disposals of investments, the impact of the
COVID 19 pandemic as well as those factors detailed from time to time in the Company’s interim and annual financial
statements and reports, all over which are available for review on ASX at asx.com.au and OTC Markets at
otcmarkets.com.
Although the Company has attempted to identify important factors that could cause actual actions, events or results to
differ materially from those described in forward-looking statements will prove to be accurate, as actual results and
future events could differ materially from those anticipated in such statements. Accordingly, readers should not place
undue reliance on forward-looking statements.
Not an offer of securities
This announcement does not constitute an offer to sell, or a solicitation of an offer to buy, securities in the United States
or any other jurisdiction. Any securities described in this announcement have not been, and will not be, registered
under the US Securities Act of 1933 and may not be offered or sold in the United States except in transactions exempt
from, or not subject to, the registration of the US Securities Act and applicable US state securities laws.
Annexure A:
JORC Code, 2012 Edition – Table 1
Section 1 Sampling Techniques and Data
Criteria
JORC Code explanation
Commentary
Sampling
techniques
• Nature and quality of sampling (eg cut channels, random chips, or
specific specialised industry standard measurement tools appropriate
to the minerals under investigation, such as down hole gamma
sondes, or handheld XRF instruments, etc). These examples should
not be taken as limiting the broad meaning of sampling.
• Include reference to measures taken to ensure sample representivity
and the appropriate calibration of any measurement tools or systems
used.
• Aspects of the determination of mineralisation that are Material to the
Public Report.
• In cases where ‘industry standard’ work has been done this would be
relatively simple (eg ‘reverse circulation drilling was used to obtain 1
m samples from which 3 kg was pulverised to produce a 30 g charge
for fire assay’). In other cases more explanation may be required,
such as where there is coarse gold that has inherent sampling
problems. Unusual commodities or mineralisation types (eg
submarine nodules) may warrant disclosure of detailed information.
• Drill type (eg core, reverse circulation, open-hole hammer, rotary air
blast, auger, Bangka, sonic, etc) and details (eg core diameter, triple
or standard tube, depth of diamond tails, face-sampling bit or other
type, whether core is oriented and if so, by what method, etc).
• Method of recording and assessing core and chip sample recoveries
and results assessed.
• Measures taken to maximise sample recovery and ensure
representative nature of the samples.
• Whether a relationship exists between sample recovery and grade
and whether sample bias may have occurred due to preferential
loss/gain of fine/coarse material.
• Diamond drilling was used to collect HQ triple tube (HQ3 63.5mm)
diameter core.
• Core was cut and quarter core sampled on 1.5m intervals or
lithological and/or alteration boundaries.
• Colluvium/overburden was not sampled.
• All samples were placed into individually labelled, consecutively
numbered sample bags.
• Metallurgical test work samples were a composite sample of quarter
core or coarse rejects from the previously conducted geochemical
assaying and are believed to be representative of the interval under
investigation.
• The samples (approximately 700kg total) came from holes MDD004,
MDD006, MDD012, MDD018, MDD023 and MDD026 with samples
taken from Units 4, 6, 8 and 10 within the Indicated portion of
conceptual Pit Shell 5 (nominal 0-20 years).
Drilling
techniques
Drill sample
recovery
• Diamond drilling was used to collect HQ3 (63.5mm) diameter core.
• Core holes were drilled vertically, and core was not oriented.
• Core blocks inserted by the drilling company indicated the length of a
run and the amount of recovered core in feet. The site geologist
converted this to metres and core recovery was recorded on the
sampling sheet. Core recovery was the primary focus for the drill
contractor and was typically >90% in the zones of interest.
• Core recovery was recorded by the site geologist, and 1m downhole
depths marked prior to geological logging and sampling.
• No relationship between recovery and grade was observed, no core
loss was observed over the interval under investigation.
Criteria
JORC Code explanation
Commentary
Logging
• Whether core and chip samples have been geologically and
geotechnically logged to a level of detail to support appropriate
Mineral Resource estimation, mining studies and metallurgical
studies.
• Whether logging is qualitative or quantitative in nature. Core (or
costean, channel, etc) photography.
• The total length and percentage of the relevant intersections logged.
• If core, whether cut or sawn and whether quarter, half or all core
taken.
• If non-core, whether riffled, tube sampled, rotary split, etc and
whether sampled wet or dry.
• For all sample types, the nature, quality and appropriateness of the
sample preparation technique.
• Quality control procedures adopted for all sub-sampling stages to
maximise representivity of samples.
• Measures taken to ensure that the sampling is representative of the
in-situ material collected, including for instance results for field
duplicate/second-half sampling.
• Whether sample sizes are appropriate to the grain size of the material
being sampled.
• The nature, quality and appropriateness of the assaying and
laboratory procedures used and whether the technique is considered
partial or total.
• For geophysical tools, spectrometers, handheld XRF instruments, etc,
the parameters used in determining the analysis including instrument
make and model, reading times, calibrations factors applied and their
derivation, etc.
• Nature of quality control procedures adopted (eg standards, blanks,
duplicates, external laboratory checks) and whether acceptable levels
of accuracy (ie lack of bias) and precision have been established.
• The verification of significant intersections by either independent or
alternative company personnel.
• The use of twinned holes.
• Documentation of primary data, data entry procedures, data
verification, data storage (physical and electronic) protocols.
• Discuss any adjustment to assay data.
• Qualitative lithological descriptions were recorded by the field
geologist once core had been presented and depths marked.
Correlation of this information to the field mapping and stratigraphic
sections described in the immediate area is ongoing to build a
comprehensive picture of the geology over the project area.
• Photos (wet and dry) were taken of all core trays for later review.
Sub-sampling
techniques
and sample
preparation
Quality of
assay data
and
laboratory
tests
Verification of
sampling and
assaying
• Core was cut, and quarter core sampled over 2m intervals.
• The samples were individually crushed to 70% passing less than
2mm, and 500g sub samples were riffle split off by ALS Laboratories
in Reno, Nevada with the remaining samples (coarse residues)
averaging approximately 1.7kg each.
• Quarter core and the coarse residue samples from ALS Laboratories
were forwarded to Hazen Research Inc. in Golden, Colorado (Hazen)
where they were crushed to 100% passing 1.7mm before compositing
to be used for the metallurgical testwork documented in this
announcement.
• Samples were originally assayed by ALS Laboratories in Reno,
Nevada via a 4-acid digest of a 0.25g sample split with a 48 element
ICP-MS finish as previously reported.
• Hazen analysed the head sample for Li and a range of other
elements using 4-acid digest and peroxide fusion digest with the
digested solution analysed by ICP-OES.
• Laboratory QAQC involves the use of internal lab standards, splits
and replicates as part of in-house procedures. Hazen participates in
numerous external umpire assessments to maintain high levels of
QAQC in relation to their peers.
• Assay results were verified by more than one Jindalee geologist.
• Data from Hazen is received and stored electronically. To date no
.pdf certificates have been received for the assays completed by
Hazen.
Criteria
JORC Code explanation
Commentary
Location of
data points
• Accuracy and quality of surveys used to locate drill holes (collar and
down-hole surveys), trenches, mine workings and other locations
used in Mineral Resource estimation.
• Specification of the grid system used.
• Quality and adequacy of topographic control.
• Drill hole locations were surveyed using a handheld Garmin GPS with
an accuracy of +/- 3m horizontally, and +/- 5m vertically; hole
positions were also checked against a Digital Elevation Model (DEM).
• Locations are reported in metres NAD83 Zone11.
• Downhole surveys were undertaken at approximately 30m intervals
downhole and at the end of hole. The maximum variation from vertical
observed was 1.7°, typically <0.5°, with a survey accuracy of +/- 0.1°.
Data spacing
and
distribution
• Data spacing for reporting of Exploration Results.
• Whether the data spacing and distribution is sufficient to establish the
degree of geological and grade continuity appropriate for the Mineral
Resource and Ore Reserve estimation procedure(s) and
classifications applied.
• Whether sample compositing has been applied.
• Spacing of drilling and associated sampling is adequate for
assessment of the areas and geological horizon(s) of interest.
• An Indicated and Inferred Mineral Resource has been estimated for
the McDermitt Project (refer Jindalee’s ASX announcement dated
27/02/2023 for further details).
• Sample compositing was undertaken for metallurgical test work as
described above.
Orientation of
data in
relation to
geological
structure
• Whether the orientation of sampling achieves unbiased sampling of
possible structures and the extent to which this is known, considering
the deposit type.
• If the relationship between the drilling orientation and the orientation
of key mineralised structures is considered to have introduced a
sampling bias, this should be assessed and reported if material.
• The measures taken to ensure sample security.
• Vertical drill holes were appropriate for assessing the flat lying units of
interest. Downhole lengths reported are therefore the same as true
widths.
• The results of any audits or reviews of sampling techniques and data.
• The testwork undertaken by Hazen was supervised by metallurgists
employed by Hazen and reviewed by senior metallurgists from Fluor
Corporation.
Sample
security
Audits or
reviews
• Samples were collected by qualified geological consultants engaged
by Jindalee and stored on site in locked sample storage bins provided
by ALS Laboratories, who then collected the bins and transported
them to their facilities in either Reno or Elko, USA.
• Metallurgical samples were sent from ALS Laboratories in Reno,
Nevada to Hazen Research Inc. in Golden, Colorado, USA.
• All samples were received as expected by the laboratories with no
missing or mis-labelled samples.
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria
JORC Code explanation
Commentary
Mineral
tenement and
land tenure
status
• Type, reference name/number, location and ownership including
agreements or material issues with third parties such as joint
ventures, partnerships, overriding royalties, native title interests,
historical sites, wilderness or national park and environmental
settings.
• The security of the tenure held at the time of reporting along with any
known impediments to obtaining a licence to operate in the area.
• Acknowledgment and appraisal of exploration by other parties.
• Samples reported are all from land managed by the US Bureau of
Land Management, with the mineral rights held under placer and lode
claims owned 100% by HiTech Minerals Inc., a wholly owned US
based subsidiary of Jindalee Resources Limited.
• No joint ventures or royalty interests are applicable.
Exploration
done by other
parties
Geology
Drill hole
Information
Data
aggregation
methods
• Deposit type, geological setting and style of mineralisation.
• A summary of all information material to the understanding of the
exploration results including a tabulation of the following information
for all Material drill holes:
o easting and northing of the drill hole collar
o elevation or RL (Reduced Level – elevation above sea level in
metres) of the drill hole collar
o dip and azimuth of the hole
o down hole length and interception depth
o hole length.
• If the exclusion of this information is justified on the basis that the
information is not Material and this exclusion does not detract from
the understanding of the report, the Competent Person should clearly
explain why this is the case.
• In reporting Exploration Results, weighting averaging techniques,
maximum and/or minimum grade truncations (eg cutting of high
grades) and cut-off grades are usually Material and should be stated.
• Where aggregate intercepts incorporate short lengths of high grade
results and longer lengths of low grade results, the procedure used
for such aggregation should be stated and some typical examples of
such aggregations should be shown in detail.
• The assumptions used for any reporting of metal equivalent values
• At McDermitt, historic uranium exploration by Chevron first identified
the presence of lithium. No data from historic work undertaken within
the McDermitt Project area has been obtained.
• Lithium is hosted in flat-lying, lacustrine sediments deposited within
the Tertiary aged McDermitt caldera.
• Please see table and figures in main body of text, including in
previous releases referenced above.
• Significant intercepts are presented as a weighted average above a
1000ppm Li cut-off, with a maximum of 10 feet (3.05m) internal
‘waste’ (where ‘waste’ is defined as intervals with less than 1000ppm
Li) and a minimum downhole width of 20 feet (6.1m).
• Conversion from Li ppm to Li2O is achieved by multiplying by 2.153
and converting to %.
• Lithium carbonate equivalent (LCE) is calculated by taking the Li
Criteria
JORC Code explanation
should be clearly stated.
Relationship
between
mineralisation
widths and
intercept
lengths
Diagrams
Balanced
reporting
Other
substantive
exploration
data
Further work
• These relationships are particularly important in the reporting of
Exploration Results.
• If the geometry of the mineralisation with respect to the drill hole
angle is known, its nature should be reported.
• If it is not known and only the down hole lengths are reported, there
should be a clear statement to this effect (eg ‘down hole length, true
width not known’).
• Appropriate maps and sections (with scales) and tabulations of
intercepts should be included for any significant discovery being
reported These should include, but not be limited to a plan view of
drill hole collar locations and appropriate sectional views.
• Where comprehensive reporting of all Exploration Results is not
practicable, representative reporting of both low and high grades
and/or widths should be practiced to avoid misleading reporting of
Exploration Results.
• Other exploration data, if meaningful and material, should be reported
including (but not limited to): geological observations; geophysical
survey results; geochemical survey results; bulk samples – size and
method of treatment; metallurgical test results; bulk density,
groundwater, geotechnical and rock characteristics; potential
deleterious or contaminating substances.
• The nature and scale of planned further work (eg tests for lateral
extensions or depth extensions or large-scale step-out drilling).
• Diagrams clearly highlighting the areas of possible extensions,
including the main geological interpretations and future drilling areas,
provided this information is not commercially sensitive.
Commentary
value and multiplying by 5.323 to determine the molar equivalent in
standard industry fashion.
• Vertical drill holes were appropriate for assessing the flat lying units of
interest. Downhole lengths reported are therefore the same as true
widths.
• See main body of announcement.
• Only selected metallurgical test results relevant to this release have
been reported.
• Field mapping across the project area, aerial photography and
description of stratigraphic sections exposed in several escarpments
allows for correlation of the geology between drill holes.
• Metallurgical test work is reported herein. Other data published is
from previous releases and references to these have been provided.
• Metallurgical testwork (previously announced) has indicated high
lithium recoveries from leaching with sulphuric acid at moderate
temperature and atmospheric pressure and that the mineralised
material can be beneficiated using attrition scrubbing.
• Further metallurgical test work is currently underway to identify
improved options for lithium extraction ahead of a Pre-feasibility
Study (PFS) expected to be completed by mid-2024.
• Additional drilling is planned to define extensions to known
mineralisation, upgrade the mineral resource estimate and obtain
samples for further metallurgical testwork.
Share your feedback
Discover